Anmol Chemicals is the pioneer manufacturers of Zinc Peroxide & Zinc Oxide, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Zinc Peroxide & Zinc Oxide made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Zinc Peroxide & Zinc Oxide is in these pages. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal |
------------
Zinc Peroxide Zinc Oxide Commercial Pure BP Ph Eur n FCC Food Grade Manufacturers
Zinc Oxide CAS Number 1341-13-2
Zinc Peroxide CAS Number 1314-22-3
SDS GHS, MSDS Sheet of Zinc Oxide
SDS GHS, MSDS Sheet of Zinc Peroxide
Arabic مصنعي أكسيد الزنك بيروكسيد الزنك
Spanish Fabricantes de peróxido de zinc y óxido de zinc
Portuguese Fabricantes de peróxido de zinco e óxido de zinco
French Fabricants de peroxyde de zinc et d'oxyde de zinc
Dutch Fabrikanten van zinkperoxide en zinkoxide
German Hersteller von Zinkperoxid und Zinkoxid
Italian Produttori di perossido di zinco e ossido di zinco
Zinc Oxide BP Ph Eur Grade Specifications
Ph Eur
ZnO -- 81.4 -- CAS Number 1341-13-2
DEFINITION
Content: 99.0 per cent to 100.5 per cent (ignited substance).
CHARACTERS
Appearance: Soft, white or faintly yellowish-white, amorphous powder, free from gritty particles.
Solubility: Practically insoluble in water and in ethanol (96 per cent). It dissolves in dilute mineral acids.
IDENTIFICATION
A. It becomes yellow when strongly heated; the yellow colour disappears on cooling.
B. Dissolve 0.1 g in 1.5 ml of dilute hydrochloric acid and dilute to 5 ml with water. The solution gives the reaction of zinc.
TESTS
Alkalinity: Shake 1.0 g with 10 ml of boiling water. Add 0.1 ml of phenolphthalein solution and filter. If the filtrate is red, not more than 0.3 ml of 0.1 M hydrochloric acid is required to change the colour of the indicator.
Carbonates and substances insoluble in acids: Dissolve 1.0 g in 15 ml of dilute hydrochloric acid. It dissolves without effervescence and the solution is not more opalescent than reference suspension and is colourless.
Arsenic: Maximum 5 ppm, determined on 0.2 g.
Cadmium: Maximum 10.0 ppm.
Iron: Maximum 200 ppm.
Lead: Maximum 50.0 ppm.
Loss on ignition: Maximum 1.0 per cent, determined on 1.00 g by ignition to constant mass at 500 ± 50 C.
ASSAY
Dissolve 0.150 g in 10 ml of dilute acetic acid R. Carry out the complexometric titration of zinc. 1 ml of 0.1 M sodium edetate is equivalent to 8.14 mg of ZnO.
Specifications of Zinc Oxide FCC Food Grade
ZnO Formula Weight 81.38
CAS Number 1314-13-2
DESCRIPTION
Zinc Oxide occurs as a fine, white, amorphous powder. It gradually absorbs carbon dioxide from the air. It is insoluble in water and in alcohol, and is soluble in dilute acids and in strong bases.
Function: Nutrient.
Identification:
A. When strongly heated, a sample assumes a yellow color that disappears on cooling.
B. A solution of sample in a slight excess of 3 N hydrochloric acid gives positive tests for Zinc, Appendix IIIA.
Assay: Not less than 99.0% of ZnO after ignition.
Alkalinity: Passes test.
Cadmium: Not more than 3 mg/kg.
Lead: Not more than 10 mg/kg.
Loss on Ignition: Not more than 1.0%.
Substances Not Precipitated by Sulfide: Not more than 0.5%.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Zinc peroxide (ZnO2) appears as a bright yellow powder at room temperature. It was historically used as a surgical antiseptic. More recently zinc peroxide has also been used as an oxidant in explosives and pyrotechnic mixtures.
Specifications of Zinc Peroxide
Synonym: Zinc Superoxide
CAS Number 1314-22-3
Molecular Formula: ZnO2
Molecular Weight: 97.4
Description: An off-white to yellowish white color powder.
Solubility: Practically insoluble in water and organic solvents. Soluble in mineral acids.
Chloride: Max. 50ppm
Sulfate: Max. 50ppm
Purity: 60% minimum and 70% minimum. Two different grades.
Zinc Peroxide & Zinc Oxide manufacturers at:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264
e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Norway, Ukraine, Russia, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable. 25 February, 2022